With a considerable capacity of 80 liters or below, the Heinzelmann CHEF-S2 is suitable for sous vide cooking various dishes and food items. The taste, texture and nutrients are all preserved when you choose sous vide cooking. This way of cooking is very quiet and the sous vide appliance makes almost no noise.
Heinzelmann CHEF-S2 creates food with less fat and salt is used in the preparation, products do not burn or separate as the water does not get hotter than 99ºC. By cooking vacuum-packed dishes at a constant temperature, they also do not dry out.
Digital display on LED, Easy control panel with touch controls
Constructed of high-quality materials for long term use
IPX7 waterproof
Accurate to ±0.1 ̊C/ ̊F to keep the food at the exact level of doneness
Digital display on LED, Easy control panel with touch controls
Constructed of high-quality materials for long term use
IPX7 waterproof
Accurate to ±0.1 ̊C/ ̊F to keep the food at the exact level of doneness
Patented pump system for water - 8.0L per minute
The performance of the heater defines the quality of Sous Vide Stick of CHEF-S2 gets a Ni800 coating.
Ni800 Nickel 800 Alloy has a higher content of Chromium (Cr) and Nickel (Ni), which makes it have better corrosion resistance caused by oxidation in high temperature environments.
Less oxidation means less opportunity creating extra layer covered on heater, keep heat transfer effectively.
Ni800 heating element could work
over 5000 hrs,
while
SS304 heating element could work
around 1500 hrs
Power
Temperature Unit Switch Button
Temperature, Time Setting
Adjustment Button
Start/Stop Button
Temperature Display (6)
Temperature Display (7)
Time Display (8)
Press this button to wake up the machine and enter standby mode, ready to work, at this time, the Display (6) will shows the current temperature. The Display (7) shows the last working process’ set temperature. The target temperature set in the working process, the Display (8) shows the last working process’ set working hours.
Press on “ °C / °F” to select the temperature display unit of the machine. There are two temperature units of Celsius and Fahrenheit
to choose from.
Press on this button to switch between the temperature and time
Press on (3) to select the temperature or time to be adjusted, then use the “+” and “-” buttons.
In Standby mode, press , the machine starts working. and starts flashing.
> Wait for target temperature to be reached.
> Only after the set target temperature is reached,
indicated by a beep.
> Second Press , the time begins to count down.
“ : ”starts flashing.
> Third Press , the machine stops working, back
to standby mode.
Display shows real-time working temperature
Display shows the set operating temperature
In standby mode, the set target time is displayed.
In working mode, the remaining working time is
displayed.
We may use your Personal Information to contact you with newsletters, marketing or promotional materials and other information that may be of interest to you. You may opt out of receiving any, or all, of these communications from us by following the unsubscribe link or instructions provided in any email we send.